Samsung DCS-408I manual MMC 733 AA Plan Table, Dial Option Value Description

DCS	MMC PROGRAMS
COMBINED PROGRAMMING MANUAL	NOVEMBER 2001

MMC: 733 AA PLAN TABLE

DCS

3

CI

7

CII

3

816

3

408i

7

408

7

Used to call up the customer-recorded and pre-recorded messages into plans compiled in MMC 732, AA Translation Table. Pre-recorded messages listed below can be applied and destinations can be programmed as required. Specific ports are programmed in MMC 735, AA Use Table.

There are a total of 64 messages on an AA card:

-48 messages are to be recorded by the user (01-48),

-16 messages are pre-recorded in ROM on the card (49-64).

Options are as follows:

Dial	Option	Value	Description
00	DAY MSG	01-64	Introduction message during Day Mode
01	NIGHT MSG	01-64	Introduction message during Night Mode
02	ALTER MSG	01-64	Emergency message
03	INVLID MSG	01-64	Message when an invalid digit is dialled
04	NO ANS MSG	01-64	Message when there is no reply from the
			destination
05	XFER MSG	01-64	Transfer notifying message
06	BUSY MSG	01-64	Message on busy reply
07	NO STN MSG	01-64	Message on retrial
08	NO ACT MSG	01-64	Message on no action
09	CAMP ON	On/Off	Allow camp-on to busy extension
10	ANS DELAY	01-10	Answer Delay
11	RETRY CNT	0-5	No of times the AA will try to connect before routing
			to final destination.
12	TRANS TABLE	01-12	Assigning associated TRANS TABLE
13	BUSY DEST	Dest.	Alternative destination on busy
14	NO ANS DEST	Dest.	Alternative destination on no answer
15	NO ACT DEST	Dest.	Default destination on no action
16	INVALID DEST	Dest.	Default destination on invalid action

There is a total of 12 tables (01-12) in the system, but not all tables have to be used.

DESTINATION : STATION, STATION GROUP, AA PLAN NO, REPEAT.

PROGRAM KEYS
UP & DOWN	Used to scroll through options
KEYPAD	Used to enter selections
SOFT KEYS	Move cursor left and right
SPEAKER	Used to store data and advance to next MMC
HOLD	Used to clear previous entry

MMC 733 (Page 1 of 2)