Samsung DCS-408 manual MMC 605 Assign External Zone, EXT. page ZONE5 Member 1NONE EXT. page ZONE6

DCS	MMC PROGRAMS
COMBINED PROGRAMMING MANUAL	NOVEMBER 2001

MMC: 605 ASSIGN EXTERNAL PAGE

ZONE

DCS

3

CI

3

CII

3

816

3

408i

3

408

3

Determines which relays will close when one of the external page zones 5 to 8 is accessed. (816 and 408i/408 systems have only one external page zone—see below.)

DCS–The system must be equipped with a Trunk A card to allow external paging. Each Trunk A card is equipped with two external page relays. The page relays have default DNs of 360X (e.g. 3601)

Compact II–One external page zone is located on the base board. Three are located on the op- tional MISC card. The page relays have default DNs of 36x (e.g. 361)

816/408i/408–One external page zone (zone 5) is located on the base board. The page relay has a default DN of 361. The optional port is 362 (see MMC 219).

PROGRAM KEYS
UP & DOWN	Used to scroll through options
KEYPAD	Used to enter selections
SOFT KEYS	Move cursor left and right
SPEAKER	Used to store data and advance to next MMC
HOLD	Used to clear previous entry

ACTION

1.Open programming and select 605

Display shows first page zone (Note: Member number shows as 1 or 01 etc, depending on system)

2.Dial page zone number (e.g., 6)

OR

Use UP or DOWN to select desired page zone numbers and press RIGHT soft key to move the cursor

DISPLAY

EXT. PAGE ZONE:(5)

MEMBER 1:NONE

EXT. PAGE ZONE:(6)

MEMBER 1:NONE

3.Dial member number (e.g., 3 or 03)

OR

Use UP or DOWN to select member numbers and press RIGHT soft key to move the cursor

OR

Press LEFT soft key to return to step 2

EXT. PAGE ZONE:(6)

MEMBER 3:NONE

4.Dial relay number via dial keypad (e.g., 362 or 3602) and press RIGHT soft key to return to step 2

OR

Press LEFT soft key to return to step 3

5.Press TRSF to store and exit

OR

Press SPEAKER to store and advance to next MMC

EXT. PAGE ZONE:(6) MEMBER 3:362

Default Data:	None
Related Items:	MMC 219 Common Relay Service Type

MMC 605 (Page 1 of 1)