DCS | MMC PROGRAMS |
|
| ||
COMBINED PROGRAMMING MANUAL | NOVEMBER 2001 |
|
| ||
|
|
|
|
|
|
|
|
|
|
|
|
MMC: 716 UK LCR OPTION
DCS
3
CI
3
CII
3
816
3
408i
3
408
3
Before using this MMC, run MMC 812 to make sure the correct country option (“UK”) has been selected.
MMC 716 provides UK LCR options.
0 | NETWORK CODE | Provides secondary network access code when the call is |
|
| routed to the secondary network. 16 entries maximum |
|
| (each 10 digits maximum in length). |
1 | PIN CODE | Assigns PIN code used when the call is routed to secon- |
|
| dary 131 Cable & Wireless network. |
2 | CCC OPTION | Selects Call Cost Option and is related only to 131 Cable |
|
| & Wireless service. |
3 | STATION PIN NO | Assigns individual users to selected PIN codes in the sy s- |
|
| tem. |
Note: The second entry may be selected as a primary secondary network. By default, this is 132 (Cable & Wireless Digital Access). If dialled digits are not matched to the entry in the LCR DIGIT TABLE (MMC 710) and start with 0, the network code in the second entry will be dialled out by the system prior to transmitting dialled digits.
PROGRAM KEYS |
|
UP & DOWN | Used to scroll through options |
KEYPAD | Used to enter selections |
SOFT KEYS | Move cursor left and right |
SPEAKER | Used to store data and advance to next MMC |
HOLD | Used to clear previous entry |
ACTION
1.Open programming and select 716 Display shows
2.Dial item number (e.g., 1)
OR
Press UP or DOWN key to make selection and press RIGHT soft key.
3.Enter index number (e.g., 3)
OR
Press UP or DOWN key to make selection and press RIGHT soft key
OR
Press LEFT soft key to return to step 2
4.Enter the desired access via dial keypad and press RIGHT soft key to enter and return to step 3
5.Press TRSF to store and exit
OR
Press SPEAKER to store and advance to next MMC
DISPLAY
NETWORK CODE 01:
PIN CODE 1:
PIN CODE 3:
PIN CODE
3:QQQQQQ
MMC 716 (Page 1 of 2)
