DCS | MMC PROGRAMS |
COMBINED PROGRAMMING MANUAL | NOVEMBER 2001 |
ACTION
1.Open programming and select 606 Display shows (for example)
2.Press RIGHT soft key to advance cursor to next line
3.Press UP or DOWN key to select SYSTEM or EXT (ex- tension)
If you select EXT, go to step 4
If you select SYSTEM, press RIGHT soft key and enter valid number of blocks to assign
OR
Press UP or DOWN key to select and press RIGHT soft key
OR
Press HOLD to delete block(s)
System returns to this step to make another selection (If finished go to step 6)
4.Enter desired EXT (extension) number via dial keypad (e.g., 205)
OR
Press UP or DOWN key to make selection and press RIGHT soft key to advance cursor
DISPLAY
FREE LIST:60 SYSTEM:20
FREE LIST:60 SYSTEM:20
FREE LIST:60 SYSTEM:20
FREE LIST:60 EXT205:1
5.Enter valid number for blocks
OR
Press UP or DOWN key to make selection
OR
Press HOLD key to delete block(s)
6.Press TRSF to store and exit
OR
Press SPEAKER to store and advance to next MMC
FREE LIST:60 EXT205:5
Default Data: | System: 200 entries/20 blocks (100 entries/10 blocks for 408/408i) |
| Stations: One block of 10 entries |
Related Items: | MMC 705 Assign System Speed Dial |
| MMC 706 System Speed Dial By Name |
MMC 606 (Page 2 of 2)
