DCS | MMC PROGRAMS |
COMBINED PROGRAMMING MANUAL | NOVEMBER 2001 |
nCOMPACT II & 816 PROCEDURE
ACTION
1.Open programming and select 810 Display shows
2.Enter slot number via dial keypad (e.g. 5)
OR
Press UP or DOWN key to make selection and press RIGHT soft key to advance cursor
OR
Press ANS/RLS to select all slots
DISPLAY
HALT/PROCESSING SLOT NO:ALL→PROC
HALT/PROCESSING SLOT NO:5 →PROC
HALT/PROCESSING SLOT NO:ALL→PROC
3.Enter 1 for HALT or 0 to PROC OR
Press UP or DOWN key to make selection and press RIGHT soft key to enter data and return to step 2
4.Press TRSF to store and exit
OR
Press SPEAKER to store and advance to next MMC
HALT/PROCESSING SLOT NO:5 →HALT
Default Data: | None |
Related Items: | None |
MMC 810 (Page 2 of 2)
