Fortinet ORTIWIFI-60A /AM manual Peermodem1

Configuring the modem interface Configuring the modem using the CLI

peer_modem1	If the modem at phone1 is Actiontec or	generic
{actiontec	AscendTNT, select that type, otherwise leave
ascendTNT	setting as generic. This setting applies to the
	FortiWiFi-60AM only.
generic}
peer_modem2	If the modem at phone2 is Actiontec or	generic
{actiontec	AscendTNT, select that type, otherwise leave
ascendTNT	setting as generic. This setting applies to the
	FortiWiFi-60AM only.
generic}
peer_modem2	If the modem at phone3 is Actiontec or	generic
{actiontec	AscendTNT, select that type, otherwise leave
ascendTNT	setting as generic. This setting applies to the
	FortiWiFi-60AM only.
generic}
phone1	Enter the phone number required to connect to	No default.
<phone-number>	the dialup account. Do not add spaces to the
	phone number. Make sure to include standard
	special characters for pauses, country codes,
	and other functions as required by your modem
	to connect to your dialup account
phone2	Enter the phone number required to connect to	No default.
<phone-number>	the dialup account. Do not add spaces to the
	phone number. Make sure to include standard
	special characters for pauses, country codes,
	and other functions as required by your modem
	to connect to your dialup account.
phone3	Enter the phone number required to connect to	No default.
<phone-number>	the dialup account. Do not add spaces to the
	phone number. Make sure to include standard
	special characters for pauses, country codes,
	and other functions as required by your modem
	to connect to your dialup account.
redial	Set the maximum number of times (1-10) the	No default.
<tries_interger>	FortiWiFi unit dials the ISP to restore an active
	connection on the modem interface. Select
	none to allow the modem to redial without a
	limit.
status {disable	Enable or disable modem support.	disable
enable}
username1	Enter the user name used to access the	No default.
<name_str>	specified dialup account
username2	Enter the user name used to access the	No default.
<name_str>	specified dialup account.
username3	Enter the user name used to access the	No default.
<name_str>	specified dialup account.

Example

config system modem set action dial set status enable set holddown-time 5 set interface wan1

set passwd1 acct1passwd set phone1 1235551001 set redial 10

set username1 acct1user end

FortiWiFi-60A/AM FortiOS 3.0 MR4 Install Guide	55
01-30004-0283-20070215