Fostex PD-6 operation manual Precautions on safety, Precautions on installation

PD-6DVD Location Recorder

Precautions

Precautions on safety

Avoid excessive heat and humidity

Do not expose the PD-6 to extremes of humidity. Do not place the unit in direct sunlight, close to heating units, or in areas subject to high temperatures. Also avoid areas subject to extremely low temperatures.

The PD-6’s ambient operating temperature is between 0º and 45ºC.

Avoid excessive dust and vibration

Locations which are subject to excessive dust accumulation or vibration which could cause mechanical damage.

Avoid physical shocks

Strong physical shocks can cause damage. Handle the unit with care.

Avoid damaging the power cord

Make certain that the PD-6’s power cord is not located in a position where it is likely to be walked on or pinched by other equipment placed near the cord.

Clean with a soft dry cloth

Never use solvents such as benzine or thinner to clean the PD-6.

Wipe it clean with a soft dry cloth. If further cleaning is required, a lightly moistened cloth with a mild detergent may be used.

Do not open the case or attempt repairs or modification yourself

The PD-6 contains no user-serviceable parts. For other than routine cleaning, refer all maintenance to qualified FOSTEX service personnel.

To reduce the risk of electric shock, do not open the case. Opening the case and/or tampering with the internal circuitry will void the warranty.

<Important!>

Equipment name, electrical ratings, serial number and other information for the PD-6, are written on bottom side.

MODEL PD-6

DVD LOCATION RECORDER

FOSTEX CO.

INPUT: 12VDC

SERIAL NO.

MADE IN JAPAN

Precautions on installation

Do not install the unit in the following conditions

-in a extremely hot or cold place

-in a moist place

-in a dusty place

-in a strong magnetic field or near a device which generates a magnetic field

-in the direct sunshine

8