Fostex PD-6 Other screens, When you set an unused disk, When you set a disk with recorded data

PD-6DVD Location Recorder (Chapter 3: Names and functions)

• When you set an unused disk

If you set an unused disk after turning on the PD-6, the display prompts you to format the disk, as below. See page 24 for details about disk formatting.

• When you set a disk with recorded data

If you set a disk with recorded data after turning on the PD-6, the file name and No. are shown in the appropriate fields.

Other screens

• Time display mode selection

Each press of the [TIME/DISP MODE] key (when unSHIFTed) switches the time display mode in the following order.

	LTC
	GEN	LTC IN
	ABS
LTC	Shows LTC recorded on the disk. You can set the start time of LTC recording using the
	appropriate menu in the TC Setup mode.
LTC IN	Shows incoming external LTC. If no LTC is received, “————” is shown.
ABS	Shows the absolute time, which is set to “00H00M00S00SF” at the beginning of the file.
GEN	Shows time code generated by the internal TC generator.
	The value depends on [TC GEN] switch setting.

• Display mode selection

While SHIFTed, each press of the [TIME/DISP MODE] key switches the display between the “Normal screen” and “Level screen”.

<Normal screen> <Level screen>

44