Fostex PD-6 operation manual Input Mode switches, Phase switches, Input Gain controls

PD-6DVD Location Recorder (Chapter 3: Names and functions)

Top panel (part 2)

13

14

15

16

17

18

23 22 21 20 19

13.[INPUT MODE] switches

Each switch selects the type of analog audio input source for the corresponding channel from among the following.

L (Line)	Line-level input
D (Dynamic Mic)	Dynamic microphone
P (Phantom Power P-48)	48 V phantom powered microphone
T (Phantom Power T-12)	12 V phantom powered microphone

14.[PHASE] switches

Used to reverse the input phase.

Only even (2, 4 and 6) channels offer the [PHASE] switches.

15.[INPUT GAIN] controls

Each control adjusts the input gain of the corresponding channel.

The gain control range differs depending on the [INPUT MODE] setting, as follows.

When the [INPUT MODE] is set to “LINE”:

You can adjust the nominal input level within the range between approximately -30 and +4dBu.

When the [INPUT MODE] is set to “D”, “P” or “T”:

You can adjust the nominal input level within the range between approximately -60 and -26dBu.

41