Fostex PD-6 EDL SEL mode screen, CUE List screen, File Select screen, Contrast adjust screen

PD-6DVD Location Recorder (Chapter 3: Names and functions)

• EDL SEL mode screen

Pressing the [FILE SEL/EDL SEL] key while SHIFTed brings up the primary page of the EDL SEL mode screen. By default, the screen something like the following is shown, on which <New file> is highlighted for creating a new ALE file.

You can create or edit an EDL (Edit Decision List) file (ALE file) which is used for exporting an audio file to the AVID system.

See “Chapter 9: EDL SEL mode <creating and editing an ALE file>” on page 123 for details about the EDL SEL mode.

• CUE LIST screen

Pressing the [CUE] key brings up the cue point list screen, allowing you to check, edit or create cue points.

See “Chapter 5: Recording/playback” on page 73 for details about cue points.

• FILE SELECT screen

Pressing the [FILE SEL] key brings up the audio file list screen, on which all audio files recorded on the current disk is shown. You can load a desired audio file by selecting the file using the [SEL] dial followed by pressing the [ENTER] key.

• Contrast adjust screen

Pressing the [CONTRAST/TC SETUP] key while unSHIFTed brings up the screen for adjusting the display contrast.

While the display shows something like the following, rotate the [SEL] dial to adjust the contrast. Rotating the dial counterclockwise weakens the contrast, while rotating clockwise strengthens. After getting the desired contrast, press the [ENTER] key to confirm the setting. The contrast adjust screen is dismissed.

46