Fostex PD-6 operation manual About AC adaptor, Connecting the AC adaptor

PD-6DVD Location Recorder (Chapter 2: Before using the PD-6)

About AC adaptor

The optional genuine AC adaptor AD-15C is available. (Contact our dealer or sale office for purchasing the AD-15C.)

<Notes>

Use only the AD-15C for an AC adaptor. Using another AC adaptor may damage the PD-6 due to the mismatch of the power voltage, polarity, etc. When connect or disconnect the AC adaptor, make sure that the [POWER] switch is set to “OFF”.

• Connecting the AC adaptor

While the [POWER] switch of the PD-6 is set to “OFF”, insert the XLR-4-32 type connector of the AD-15C to the [DC IN] connector on the right side panel of the PD-6 until it is locked. Then connect the AC plug to the AC main outlet.

[DC IN] connector

AD-15C

AC adaptor

<Note>

When using an external power supply such as the AC adaptor, set the [POWER

SEL] switch under the [DC IN] connector to the “EXT” position.

<Note>

While operating the PD-6 with an external power supply (AC adaptor or external battery), you can change the AC main outlet connected to the adaptor or replace the external power supply without TC interruption if the fully charged NP-1 type is installed to the PD-6. See below for the procedure.

1)Make sure that the fully charged battery is installed to the PD-6.

2)Set the [POWER SEL] switch to “INT” from “EXT”.

3)Change the AC main outlet connected to the adaptor or replace the external power supply.

4)Set the [POWER SEL] switch to “EXT” from “INT”.

20