Fostex PD-6 operation manual Setting IEEE1394 connection IEEE1394, 121

PD-6DVD Location Recorder (Chapter 8: Utility mode)

Setting IEEE1394 connection [IEEE1394]

Using the “IEEE1394” menu, you can select “CONNECT” or “DISCONNECT” of the IEEE1394 connection.

By selecting “CONNECT”, the [IEEE1394] connector can be used to connect the PD-6 to a personal computer, and you can control the PD-6 drive from the computer.

<Note>

When “CONNECT” is selected, the PD-6 drive cannot be controlled from the panel keys.

1.Select the “IEEE1394: ****” menu and press the [ENTER] key.

The current option (“CONNECT” or “DISCONNECT”) flashes (the default is “DISCONNECT”).

flashing

2.Use the [SEL] dial to select “DISCONNECT” or “CONNECT”, and press the [ENTER] key to confirm the setting.

3.Press the [EXIT] key to exit the Utility mode.

If you exit the Utility mode after setting this menu to “CONNECT”, “Selected!— IEEE1394—” is shown on the display.

<Note>

To disconnect the IEEE1394 connection, go to the “IEEE1394” menu again and select “DISCONNECT”.

121