Fostex PD-6 Power supply for external devices, Function key, Shortcuts, Enters the TC Setup mode

PD-6DVD Location Recorder (Chapter 4: Basic connections)

Function key

F1 key	Brings up the “Edit file name” menu in the Utility mode.
F2 key	Acts the same as the [CIRCLE TAKE] key on the panel.
F3 key	Brings up the “Default file name” menu in the Setup mode.
F4 key	Brings up the “Default track name” menu in the Setup mode.

Shortcuts

ALT + F keys	Acts the same as the [FILE SEL] key on the panel.
ALT + C keys	Acts the same as the [CUE] key on the panel.
ALT + S keys	Enters the Setup mode.
ALT + U keys	Enters the Utility mode.
ALT + T keys	Enters the TC Setup mode.
ALT + E keys	Enters the EDL SEL mode.
CTRL + L keys	Acts the same as the [LOCATE] key on the panel.

Enters the TC Setup mode.

UP/DOWN	These keys can be used to enter characters or move the cursor position when
LEFT/RIGHT
	editing the name for a label or file name or in the Setup mode.
key
ESC key	Acts the same as the [EXIT] key on the panel.
ENTER key Acts the same as the [ENTER] key on the panel.

Power supply for external devices

The PD-6 provides a pair of the [DC OUT] connectors, from which “DC 12 V” power can be supplied to external devices.

External device

3	1
4	2

1	GND
2	NC
3	NC
4	DC12V

External device

<Notes>

•The [DC OUT] connectors can deliver, in total, up to 0.5 ampere electric current at DC 12V. Make sure that the total ampere rating of the devices connected to the [DC OUT] connectors does not exceed 0.5 ampere.

•We strongly recommend to use the [DC OUT] connectors while the PD-6 is running with the AC adaptor (or an external battery). If you use the [DC OUT] connectors to supply the power to one or two external devices while the PD-6 is running with the internal battery, the battery power is exhausted quickly.

55