Fostex PD-6 operation manual 110, Line No Display Details of setting/execution

PD-6DVD Location Recorder (Chapter 8: Utility mode)

The table below shows the details for the description information which Fostex registers by default according to the screen example above.

These information can be used for creating an ALE file of AVID, as well as can be directly exported to the AVID system via IEEE 1394 (or via a disk).

<Note>

Each character string before “=” shows the “header ID” of currently available meta data.

Line No.	Display	Details of setting/execution
01	fUBITS=$	The user bit used when recording time code is recorded as
		the default setting.
02	fSCENE=**********	When creating a file, the character string before “-” in the file
		name is set as SCENE by default.
03	fTAKE=***	When creating a file, the three-digit number between “-” and
		the file extension in the file name is set as TAKE by default.
04	fTAPE=***********	When creating a file, the reel number (volume label) on the
		disk is set as TAPE (up to 8 digits) by default.
05	fEVENT=*****	The five-digit number set by the “Set Next Event” menu in
		the Setup mode is set by default.
06	fTRK1=***********	Track name of each track.
		A default track name (up to 16 characters) is recorded for
		each. The screen above shows the example when the
07	fTRK2=***********	recording mode is set to stereo (2-track).The number of lines
		increases if more recording tracks are used.
08	fNOTE=	This is used for comment. By default, no data exists.

Each of these description information items can be edited.

“<New line>” (see the screen example above) is reserved for adding a new information. See “Editing a description information” on the next page for details.

110