Fostex PD-6 operation manual TC Setup mode

PD-6DVD Location Recorder (Chapter 6: TC Setup mode)

Chapter 6: TC Setup mode

This chapter describes details about each menu available in the TC Setup mode. In the TC Setup mode, you can:

1.Check and edit the LTC start reference time at ABS 0.

2.Select whether the PD-6 outputs time code or not while the recorder is paused.

3.Select user bit of output time code when the [TC OUT] switch is set to “REPRO”.

4.Check the internal time code generator status and edit the start time and user bit.

5.Select the user bit of output time code when the [TC OUT] switch is set to “GEN”.

6.Set the jam mode when the internal time code generator is in the “FREE RUN” mode.

<Table of contents>
How to select theTC Setup menu	82
Editing the LTC start time	82
Time code output while paused	83
User bit setting of playback time code	84
Editing the internal time code generator setting	85
User bit setting of internal generator time code	86
Jam mode setting	86

81