Fostex PD-6 126, While Video format is highlighted, press the Enter key, Menu Options

PD-6DVD Location Recorder (Chapter 9: EDL SEL mode <Creating and editing an ALE file>)

5.While “Video format” is highlighted, press the [ENTER] key.

The display changes to show the screen on which you can select the video format. The current option flashes (default: PAL).

flashing

6.Use the [SEL] dial to select the video format, and press the [ENTER] key to confirm the setting.

You can select the video format from among “PAL”, “NTSC” and “SECAM”. In the same manner as above, set the following menus.

“Sample FREQ” -> “TAPE” -> “TC frame” -> “Drop frame” The following table shows the options for each menu setting.

Menu	Options
Sample FRQ	44kHz, 48kHz, 88kHz, 96kHz, 176kHz and 192kHz
TAPE	Up to 5 desired characters for a reel number (TAPE)
TC frame	23.97, 30, 24, 29.97 and 25
Drop frame	On and Off (default)

The default setting for each menu except the “Drop frame” menu reflects the setting of the audio file loaded before bringing up the ALE screen.

<Notes>

•If you set the “TC frame” menu to “29.97”, set the “Drop frame” menu to “On”.

•You can use the [SEL] dial (or the numeric keys) to enter “TAPE” (reel number). Use the [ SKIP/CURSOR ] key to move the cursor. When using the numeric keys for entering characters, pressing any other numeric key moves the cursor to the right automatically.

7.After making necessary settings, press the [EXIT] key.

The display change to show the screen which asks you whether making a new ALE file or not and “Are you sure?” flashes.

flashing

<Note>

To cancel creating a file list, press the [EXIT] key at this stage.

126