Fostex PD-6 operation manual Creating a new cue point using the cue list screen, Editing time data

PD-6DVD Location Recorder (Chapter 5: Recording/playback)

• Editing time data

To edit time data, select “Position” using the [SEL] dial and press the [ENTER] key. The subframe value of the current time data flashes, showing that you can now edit it.

Select the edit point using the [ SKIP/CURSOR ] key, edit the value using the [SEL] dial, and confirm the setting by pressing the [ENTER] key.

<Note>

Pressing the [CLEAR] key resets the time value to zero (00h 00m 00s 00f 00sf).

• Deleting a cue point

To delete an unnecessary cue point, select “Delete” using the [SEL] dial and press the [ENTER] key (“Sure?” flashes).

Press the [ENTER] key to delete the cue point from the list.

<Note>

After deleting a cue point, the label column of the cue point becomes empty while the time value column shows “—h—m—s—f—”.

Creating a new cue point using the cue list screen

Using the CUE LIST screen, you can create a new cue point. Select a desired cue number which does not hold data.

By pressing the [ENTER] key, time data of the current recorder position is stored as the cue point.

In the example below, Cue 5 is created when the current recorder position is “01h58m20s**f**sf” (LTC time).

75