Fostex PD-6 operation manual 142, Line, Time Code Input, Time Code Output, VIDEO/WORD Input

PD-6DVD Location Recorder (Chapter 11: Specifications)

Inputs/Outputs

*0 dBu=0.775 Vrms, 0 dBV=1 Vrms.

Reference level : -18 dB/-20 dB (default: -18 dB, selectable in the "Ref. Level" menu of the Setup mode)

ANALOG MIC/LINE IN (CH 1 through 6)
• Connectors	:	XLR-3-31 type (balanced, pin 2: hot)
<LINE>
• Input impedance	:	More than 10kΩ
• Input level	: -30 ~ +4dBu (+/-5dB)
• Maximum input level	:	+24 dBu (+41 dBu at the prefader stage)
<MIC>
• Input impedance	:	More than 10kΩ
• Input level	:	-60 ~ -26dBu (+/-5dB)
• Maximum input level	:	-40 dBu (-23dBu at the prefader stage)
ANALOG LINE OUT (TR 1 through TR 6)
• Connectors	: XLR-3-32 type (balanced, pin 2: hot)
• Output load impedance	:	More than 10kΩ
• Reference output level	:	+4 dBu
• Maximum output level	:	+24 dBu

HEADPHONE OUTPUT (SOLO or STEREO/MONO: 1+2, MS, 3/5+4/6, 1/3/5+2/4/6, 3/5+2/4/6, 1/ 3+2/4, ST, AUX IN, ST. BUS)

• Connector	: 6mm dia stereo phone jack
• Applicable load impedance	:	More than 32Ω
• Maximum output level	:	200 mW (at 32Ω )
DIGITAL I/O (for channels 1 through 6)
• Connector	:	D-sub 25-pin (auto software selection)
• Format
<Input>	: IEC 60958 (S/P DIF) or IEC 60958 (AES/EBU),
		auto selection
<Output>	: IEC 60958 (S/P DIF) or IEC 60958 (AES/EBU),
		The format of an output signal is selected in
		the Setup mode.
TIME CODE INPUT
• Connector	: XLR-3-31 type (balanced, pin 2: hot)
• Format	:	SMPTE/EBU
• Reference input level	:	2V p-p
• Input impedance	:	More than 20kΩ
• Minimum input level	:	0.25V p-p
TIME CODE OUTPUT
• Connector	: XLR-3-32 type (balanced, pin 2: hot)
• Format	:	SMPTE/EBU
• Reference output	:	2V p-p
• Output impedance	:	Less than 1kΩ
• Output load impedance	:	More than 600Ω
VIDEO/WORD INPUT
• Connector	: BNC type (auto software selection)
• Refernce input level	:	TTL level (with 75Ω termination switch)

* The signal type (word or video) is automatically detected.

142