PD-6DVD Location Recorder (Chapter 5: Recording/playback)

Viewing the cue point list

Pressing the [CUE] key while the recorder is stopped brings up the CUE LIST screen as shown below. In this screen, the existing cue points are listed. You can scroll the list by using the [SEL] dial or [ SKIP/CURSOR ] key.

In the screen example above, cue points 1 through 4 are created, while no data is stored on and after cue point 5. The time data is shown by the time display mode before bringing up this screen (in the above example, by the LTC mode).

Editing a cue point

By selecting a desired cue point on the CUE LIST screen, you can edit its label, edit its position (time data) or delete it.

Highlight a desired cue point and press the [ENTER] key.

The display changes to show the edit screen for the selected cue point. By default, “Label” flashes on the screen.

• Editing a label

To edit a cue point label, press the [ENTER] key when “Label” flashes.

The first character of the current label flashes, showing that you can now edit it. Use the [SEL] dial (or numeric keys) to select the desired character and press the [ENTER] key.

Use the [ SKIP/CURSOR ] key to move the cursor.

When using the numeric keys for entering characters, pressing any other numeric key moves the cursor to the right automatically.

<Note>

Pressing the [CLEAR] key deletes the flashing character.

To delete the whole label, press the [CLEAR] key repeatedly when the first character flashes.

74

Page 76
Image 76
Fostex PD-6 operation manual Viewing the cue point list, Editing a cue point, Editing a label