Fostex PD-6 Error tone output setting Error tone, Write error, Input clip, Batt warning

PD-6DVD Location Recorder (Chapter 7: Setup mode)

Error tone output setting (Error tone)

The “Error tone” menu selects whether generating the error tone (warning tone) or not for each of four kinds of troubles (see below) independently. The error tone is generated from the internal monitor speaker (or headphones).

On the “Error tone” menu screen, you can select “On” or “Off” of the error tone for “Write error”, “Input clip” and “BATT warning”, as well as can set the time for “Disk warning”.

<Available conditions for generating the error tone>

The name in the bracket at the end of each condition shows each item name of the Error tone menu.

1.A write error happens during recording. [Write error]

2.The peak indicator lights because of the input overload during recording. [Input clip]

3.The internal battery voltage drops below the level set by the “BATT warning” menu. [BATT warning]

4.The remaining recording time of a disk gets under the specified time. [Disk warning]

flashing

<Write error>

Option	Comment
Off	When the peak indicator lights because of the input overload during
	recording, the error tone is not generated.
On (default)	When the peak indicator lights because of the input overload during
	recording, the error tone is generated.

<Input clip>

Option	Comment
Off	When the peak indicator lights continuously because of the input overload,
	the error tone is not generated.
On (default)	When the peak indicator lights continuously because of the input overload,
	the error tone is generated.

<BATT warning>

Option	Comment
Off	When the internal battery voltage drops below the level set by the “BATT
	warning” menu, the error tone is not generated.
On (default)	When the internal battery voltage drops below the level set by the “BATT
	warning” menu, the error tone is generated.

96