Fostex PD-6 operation manual Selecting the TC frame rate

PD-6DVD Location Recorder (Chapter 5: Recording/playback)

Chapter 5: Recording/playback

This chapter describes basic audio and time code recording/playback, as well as cue point creation and skip/locate function.

<Table of contents>
Recording analog audio	58
Selecting an input source	59
Adjusting the input gain	59
Filter setting	60
Limiter setting	60
Selecting the sampling frequency	61
Selecting recording tracks	62
Selecting a recording source	63
Adjusting the recording level	63
Monitoring recording signals	64
Making recording	65
Recording with the PRE REC mode active	66
Recording a slate tone/slate mic signal	67
About overloading	67
File names of created audio files	68
Recording digital audio	69
Selecting digital input channels	69
Selecting the sampling frequency	69
Selecting the system master clock	69
Recording time code	70
Selecting the TC frame rate	70
Selecting the TC generate mode	71
Setting the time code output	71
Jam function	72
Creating cue points	73
Creating a cue point automatically at the recording start point	73
Creating a cue point on-the-fly	73
Viewing the cue point list	74
Editing a cue point	74
Creating a new cue point using the cue list screen	75
Playback	76
Normal audio playback	76
Time code playback	77
Cueing playback	77
Skip/locate functions	78
Skipping by file	78
Skipping by cue point	78
Locating to the beginning (ABS 0) of a file	78
Locating to the end (REC END) of a file	78
Locating to the previous locate point	78
Locating to the desired time	79
Locating to the desired cue point	79

57