Fostex PD-6 operation manual Digital audio output connection, Time code output connection

PD-6DVD Location Recorder (Chapter 4: Basic connections)

Digital audio output connection

The digital audio signals can be output from the [DIGITAL OUT] connector (D-sub 25- pin type) in the IEC 60958 (AES/EBU) or IEC 60958 (S/P DIF) format.

You can select the digital output signal format (AES/EBU or S/P DIF) using the “Digital out” menu in the Setup mode (. See page 91 for details about the “Digital out” menu.

Time code output connection

You can output SMPTE/EBU time code from the [TIME CODE OUT] connector (balanced, XLR-3-32 type).

According to the [TC OUT] switch setting, time code recorded on a disk (REPRO TC) or generated by the internal time code generator (INT GEN TC) can be output.

Word clock output connection

Using the [WORD OUT] connector (BNC type), you can feed a word clock to a digital device which needs to get a word clock for synchronization.

Monitor output connection

The stereo buss L/R signals can be output from the [AUX OUT] connectors. So, you can monitor the stereo buss signals from an external monitor system, as well as from the internal monitor speaker and headphones.

51