24G SERIES FLATBOTTOM GAS FRYERS CHAPTER 2: IMPORTANT INFORMATION
2.1 Receiving and Unpacking Equipment
A.Check that the container is upright. Use an outward prying motion - no hammering - to remove the carton. Unpack the fryer carefully and remove all accessories from the carton. Do not discard or misplace accessories. They will be needed.
B.After unpacking, immediately check the equipment for visible signs of shipping damage. If damage has occurred, contact the carrier and file the appropriate freight claims. Do not contact the factory. Shipping damage responsibility is between the carrier and the dealer.
If your equipment arrives damaged:
1.File claim for damages immediately, regardless of extent of damage.
2.Visible loss or damage: Be sure this is noted on the freight bill or express receipt and is signed by the person making the delivery.
3.Concealed loss or damage: If damage is unnoticed until equipment is unpacked, notify freight company or carrier immediately, and file a concealed damage claim. The claim should be filed within 15 days of date of delivery. Be sure to retain container for inspection.
NOTE: Dean Does Not Assume Responsibility for Damage or Loss Incurred in Transit.
C.Move the fryer to the location of installation and install legs and/or casters as described in Chapter 3.2.
D.Remove all plastic skin from sides, front, and doors of the fryer(s). Failure to do this prior to initial fryer operation will make it very difficult to remove later.
2.2 General
Qualified, licensed, and/or authorized installation or service personnel only (as defined in Section 1.5) should perform the following:
•Installation and service on Dean equipment.
•Conversion of this appliance from one gas type to another.
Failure to use qualified, licensed, and/or authorized installation or service personnel to install, convert to another gas type or otherwise service this equipment will void the Dean warranty and may result in damage to the equipment or injury to personnel.
