Frymaster 24G Series operation manual Leveling the Fryer cont, Rigid Casters Only

24G SERIES FLATBOTTOM GAS FRYERS CHAPTER 3: INSTALLATION INSTRUCTIONS

3.3 Leveling the Fryer (cont.)

Rigid Casters (Only)

1.Install the rigid casters on the fryer rear channel only. Legs must be installed on the front channel.

2.There are no level adjustments for the rigid casters.

B.If the floor is uneven or has a decided slope, place the fryer on a level platform.

C.If the fryer is moved, re-level the fryer following the instructions given in Steps 3.3, A-B.

D.An installed fryer must be restrained to prevent tipping, which could splash hot oil. Restraints can be straps or chains anchored to an immovable object (wall, floor anchor), or the manner of installation (installing the fryer in an alcove, battering to other appliances, etc.).

E.Installing Optional Swivel Casters:

1.Install non-locking casters only at the rear of the unit.

2.Locking casters must be installed at the front of the unit. Locking casters allow the fryer to be "locked" in position for safe operations.

3.Follow the same instructions for leg installations as given above in steps 3.2, B1-5.

Front ViewRear Side View

	1/4-20 x 3/4 Hex Bolt
	Front Channel or
Front Channel	Rear Channel
	Leg Support Assembly
or Rear Channel
	Washer

1/4-20 Hex Head Locknut

Optional Caster-	Optional Caster-
Rear Only	Front Only

Front or Rear Leg with Mounting Plate

1/4-20 x 3/4 Hex Bolt

Adjust as needed

Rear Caster—5" Rigid	Front Caster—5" Swivel
	w/Brake

Leg and Caster (Optional) Mounting Installation

3-3