4.5 Changing Carrier Sheet Settings

ATTENTION

•When you select [Automatic Detection] in the "Output image size" drop-down list and scan an irregular-sized document (not in the table above), the scanned image is output in a standard size that is larger than and the nearest to the original document size.

If you want to output a scanned document image in its original size, add a custom size beforehand in the "Add or Remove Custom sizes" dialog box, which appears when the [Custom] button is clicked, and then select the added size in the "Output image size" drop-down list.

•When you select [Automatic Detection] in the "Output image size" drop-down list, the output image size may be larger than the original. If so, try the following:

-Insert a document into the Carrier Sheet so that the sides of the document and Carrier Sheet becomes parallel.

-Adjust the side guides to the width of the Carrier Sheet to prevent the Carrier Sheet from skewing.

If the situation does not improve, select a size in the "Output image size" drop-down list.

[Add custom size] button

You can create up to 5 custom sizes.

Clicking the [Add custom size] button displays the following dialog box.

To add custom size documents

1)Click the [Add] button.

2)The following dialog box appears.

•Type in the width and length.

You can create custom sizes of the following:

Width: 50.8 - 216 mm (2 - 8.5 in.)

4

ScanSnap the Setting

ScanSnap S510 Operator's Guide

 

109