Protect the scanner from static electricity.
Install the scanner away from strong magnetic fields and other sources of electronic noise. Also, protect the scanner from static electricity as this might cause the scanner to malfunction.
Do not use aerosol sprays near the scanner.
Do not use aerosol sprays to clean the scanner. Aerosol sprays cause dirt and dust to enter the scanner, resulting in scanner failure and malfunction.
Avoid any contact when scanner is working.
Avoid touching any scanner mechanism when scanning as this may cause injuries.
Unplug the power cord from the electrical outlet when the scanner is not used for an extended period of time.
For your safety, unplug the power cord from the electrical outlet when the scanner is not used for an extended period of time.
Do not expose the scanner to direct sunlight.
Do not install the scanner in a location exposed to direct sunlight or near any heating apparatus. Doing so increases the inside temperature of the scanner, and a fire or failure may occur. Install the scanner in a
Do not use the scanner immediately after moving it from a cold place into a warm room.
Do not use the device immediately after moving it from a cold place into a warm room. This may cause condensation, which might lead to scanning errors. Let the device dry about one or two hours before you use it.
xvi