1.2 Names and Functions of Components
1.2Names and Functions of Components
This section describes the names of parts and their functions.
■Front View
Paper chute
Open the cover to use the scanner.
⇒Opening the cover turns on the scanner.
ADF
(ADF:Automatic Document Feeder)
Paper chute
After opening it, load the documents to be scanned on this part.
Side guide
Adjust the side guides to the width of documents so that the scanned images will not be skewed.
Cover open lever
To open the ADF, pull this lever toward you.
Operation button
⇒Refer to the next page.
Stacker
Before using the stacker, unfold and extend it as shown above.
You can also use the ScanSnap without unfolding the Stacker.
HINT
1
ScanSnap the Using Start You Before
ScanSnap S510 Operator's Guide |
| 3 |
|