9.3 Replacing the Pick Roller

6. Remove the pick roller with its shaft.

Slightly pull up the left part of the Pick roller shaft (about 5mm), move it towards the left side, and then raise it to remove from the scanner.

Pick roller shaft

Pick roller

If the around the pick roller is dirty by paper-powder, it may cause a scanning

ATTENTION

error. Remove the dirt using a dry cloth moistened with Cleaner F1.

*Don't use water, mild detergent or air-spray.

7.Remove the pick roller from its shaft.

Pull out the shaft from the pick roller while lifting up its tab.

Tab

Shaft

Pick roller

9

Sheet Carrier and Consumables Replacing

ScanSnap S510 Operator's Guide

 

245