6.1 Using ScanSnap Manager
6. Load the document onto the paper chute.
SCAN
POWER
ATTENTION
•Place all documents in the center under the pick roller. (Documents that are not under the pick roller cannot be fed.)
SCAN
POWER
•Adjust the side guide to the widest document.
•Carefully load the smaller documents, which cannot contact the side guide, so that they can be fed straight. If the documents are skewed during a scan, the quality of scanned images may be degraded (chipped images/slant lines produced) or scanned images may be output in different size from the original. If you have difficulties feeding documents straight, it is recommended to scan documents in several batches; scan documents of about the same width in one batch.
Note that smaller documents that cannot be guided by the side guide may cause a jam.
6
Ways Various in ScanSnap the Using
ScanSnap S510 Operator's Guide |
| 185 |
|