2.2 Connecting the ScanSnap to your PC

Connecting the USB Cable

Connect the USB cable as shown below.

ATTENTION

Operation

Use only the USB cable supplied with the Scanner.

When connecting to a USB hub, be sure to connect the ScanSnap to the hub nearest your personal computer (first stage). If you connect it to a USB hub from the second stage onwards, the ScanSnap may not function correctly.

If you connect the ScanSnap with USB 2.0, it is required that the USB port and the Hub be compliant with USB 2.0. The scanning speed may slow down when you connect the ScanSnap with USB 1.1. If your computer has the USB 2.0 compatible port, use it.

2

Connecting

1. Remove the seal on the back side of the ScanSnap.

DC 16V

USB cable

Seal

2.Connect the USB cable to the USB connector on the ScanSnap, and the other end of the USB cable into the USB port on your personal computer.

Insert the USB cable into the connector all the way to the end.

USB cable

ScanSnap the

ScanSnap S510 Operator's Guide

 

23