Turning the ScanSnap On/Off

You can turn on/off the ScanSnap by doing either of the following:

-Turn on/off the personal computer.

-Open/close the paper chute of the ScanSnap.

The ScanSnap is turned on/off in conjunction with the personal computer connected. Therefore, you do not have to press the power button on the ScanSnap to turn it on/off.

When you turn off the personal computer or close the paper chute of the ScanSnap...

The power indicator goes off and the ScanSnap is turned off.

When you turn on the personal computer or open the paper chute of the ScanSnap...

The power indicator illuminates and the ScanSnap is turned on.

To turn off the ScanSnap with the paper chute open, press the [POWER] button on the ScanSnap.

HINT

ATTENTION

To turn on/off the ScanSnap, press the [POWER] button for longer than one second.

*To prevent unintended operation, the [POWER] button does not work unless it is pressed for longer than one second.

Depending on specifications of your personal computer, the following symptoms may occur. Even so, the ScanSnap is not malfunctioning.

The ScanSnap is initialized several times during startup.

It may take 2 to 3 minutes until the power indicator goes off after the personal computer is turned off.

44