<Scanning procedure>

Operation

1.Load the business cards onto the ScanSnap.

Load the business cards face down.

When you scan more than one business card, set them together.

Adjust the side guides so that they are touching the business card edges.

Paper chute

Business card

Side guide

[SCAN] button

2.Press the [SCAN] button on the ScanSnap.

Scanning will be started. After the scanning has finished, the "CardMinder" screen is displayed.

ATTENTION

Do not connect or disconnect other USB devices during the scanning operation.

Do not close the paper chute or press the [POWER] button on the ScanSnap during the scanning operation.

Do not switch the user to log in during the scanning operation.

HINT

As the default setting, documents are scanned at "Duplex" mode when you press the [SCAN] button. Using ScanSnap Manager, you can set the ScanSnap to scan documents in "Simplex" mode by pressing [SCAN] button.

You can also start scanning with the ScanSnap Manager icon S on the task bar.

*For details, refer to "4.2 Changing Scanning Settings" (on page 67).

206