8.3 Cleaning the Inside of the Scanner

2. Clean the following locations with a cloth moistened with Cleaner F1.

Pad ASSY

Plastic roller

8

Care Daily

Pick roller

Feed roller

Glass (2 places)

Eject roller

ATTENTION

It may take long before the cleaner vaporizes if a large quantity is used. When cleaning the scanner parts, dampen a cloth with modest quantities of the cleaner. In addition, wipe off the cleaner completely with a soft lint-free cloth to leave no residue on the surface of the cleaned parts.

Turn off the scanner before cleaning the following locations.

•Pad ASSY (1 piece)

Wipe the Pad ASSY downwards. When cleaning the Pad ASSY, take care to prevent the cloth from catching on the metal parts.

•ADF glass surfaces (2 pieces; located on the ADF and opposite side)

Clean lightly.

•Pick roller (1 piece)

Clean lightly taking care not to scratch the surface of the roller. Take particular care in cleaning the Pick roller since black debris on the roller adversely affects the pickup performance.

•Plastic rollers (4 pieces on the ADF)

Clean them lightly while rotating the rollers with your finger. Be careful not to roughen the surface of the rollers. Take particular care in cleaning the plastic rollers since black debris on the rollers adversely affects the pickup performance.

ScanSnap S510 Operator's Guide

 

233