4.Press the [SCAN] button 
on the ScanSnap.
⇒The scanning is started.
HINT
•By default, documents are scanned in "Duplex" mode when you press the [SCAN] button. In the "ScanSnap Manager - Scan and Save Settings" dialog box, you can switch the scanning mode of the [SCAN] button to "Simplex" mode.
• Scanning can also be started by using the ScanSnap Manager icon S on the task bar.
For details about this operation, refer to "4.1 About the ScanSnap Icon" (page 64).
ATTENTION
•Do not connect or disconnect other USB devices during the scanning operation.
•Do not close the paper chute during the scanning operation.
•Do not switch the user to log in during the scanning operation. Otherwise, the scanning is canceled.
⇒The power indicator (lamp) 
on the ScanSnap blinks blue during the scanning operation. The following window appears to indicate the scanning status.
⇒When the scanning is complete, the ScanSnap Quick Menu appears.
36