Fujitsu T902, FP1000, BTBK410000BAAAPP manual Restoring Your System Image and Software Windows

To delete hard disk data:

a. Click the [Hard Disk Data Delete] button

b. The progress bar appears, followed by the EULA screen. c. Agree to the EULA and click [Next].

d. Choose the hard disk from which the data should be deleted in the list of hard disks and click [Next].

•The Partition Creation utility is used to change the C: and D: drive partition sizes. To run this utility:

a.Click the [Partition Creation] button.

b.A progress bar screen appears, followed by the EULA screen. Agree to the EULA.

c.On the Recovery Tool - Partition Creation screen move the slider to set disk size, then click [OK].

d.Click YES in the Partition Creation confirmation dialog.

Recovering your Factory Image using Recovery and Utility (for new hard drive or non-bootable hard drive) If you have installed a new hard drive or your hard drive is not bootable, perform the following steps.

1Power on your system. When the Fujitsu logo appears on the screen, press the [Enter] key.

2Highlight the CD/DVD option from the Boot Menu and press [Enter].

3Insert the bootable disc in your DVD drive, then click [OK].

4Select CD/DVD boot mode: UEFI Mode and press [Enter]. While the files are being loaded from the disc, Fujitsu logo screen will appear followed by a progress bar screen at the bottom of the screen.

5Choose your language ([English or French).

6Three tool options appear: Diagnostics, Recovery and Utility. Select [Recovery].

7Select [Restore full hard drive].

8Click [Next] to confirm full hard drive restoration. (All data on HDD will be deleted).

9Agree to EULA by selecting [Agree] option and clicking [Next].

10Click [Next] on the Recovery Disk Check screen to verify that the bootable disk has been inserted into the optical drive.

118 - Restoring Your System Image and Software (Windows 8)