Fujitsu BTBK410000BAAAPP, T902, FP1000, KA02066D105 manual Cold-swapping, Hot-swapping

Cold-swapping

To cold-swap modular devices in your Modular Bay follow these easy steps:

1Close any open files and shut down your LifeBook notebook.

2Pull out the Flexible Bay release latch. This will push your device out slightly, allowing you to remove it.

3Slide your device out until it is clear of the bay. This will require light force.

4Slide the device you are installing into your notebook until it clicks into place.

5It is now safe to turn your notebook back on.

6You can now access and use the device.

Your Tablet PC will automatically detect the device and activate it within your system. The drive letters associated with the device will be created and listed under My Computer and Windows File/Explorer.

Hot-swapping

Hot-swapping is provided through the Safely Remove Hardware utility. The icon for the utility appears in the system tray. Click on the icon and follow the on-screen instructions.

Modular Bay

Release Latch

Figure 34. Removing/Installing Modular Device

Modular Bay

Device

48 - Modular Bay Devices