76
- Secure Digital Cards
Installing SD Cards
SD Cards are installed in the SD Card slot. To install an SD Card, follow these steps:

1See your specific card manual for instructions on the installation of your card. Some cards may require that your

Tablet PC is off while installing them.

2Make sure there is no card currently in the slot. If there is, see Removing an SD Card below.

3Insert your card into the slot with the product label facing up.

4Push the card firmly into the slot until it is seated in the connector.

Removing an SD CardTo remove an SD Card, follow these easy steps:

1Select Safely Remove Hardware from the System Tray. Highlight the card in the list, then click [Stop].

2Push the SD Card in until it unlatches. It will then eject from the slot for removal.

INSTALLING OR REMOVING AN SD CARD DURING YOUR LIFEBOOK TABLET PC’S SHUTDOWN OR BOOTUP PROCESS MAY DAMAGE THE CARD AND/OR

YOUR LIFEBOOK TABLET PC.

DO NOT INSERT A CARD INTO A SLOT IF THERE IS WATER OR ANY OTHER SUBSTANCE ON THE CARD AS YOU MAY PERMANENTLY DAMAGE THE CARD,

YOUR LIFEBOOK TABLET PC, OR BOTH.

SEE YOUR CARD MANUAL FOR SPECIFIC INSTRUCTIONS ON THE REMOVAL OF YOUR CARD. SOME CARDS MAY REQUIRE YOUR LIFEBOOK TABLET PC

TO BE IN SLEEP MODE OR OFF WHILE REMOVING THEM.