3.Check the status of the move-destination domain.

Execute the showdcl(8) command to display domain information, and then check the operation status of the move-destination domain. Based on the operation status of the move-source and move-destination domains, determine whether to perform the DR operation or change the domain configuration.

XSCF> showdcl -d 1

DID LSB XSB Status

01Running

0001-0

0100-1

4.Check the status of the system board to be moved.

Execute the showboards(8) command to display system board information, and then check the status of the system board to be moved.

XSCF> showboards 00-1

 

XSB DID(LSB) Assignment Pwr Conn Conf Test

Fault

----

-------- ----------- ---- ---- ---- ------- ---------------

00-1

00(01)

Assigned

y

y

y

Passed Normal

5.Move the system board.

Execute the moveboard(8) command to delete the system board from the move- source domain and add it to the move-destination domain.

XSCF> moveboard -c configure -d 1 00-1

6.Check the status of the move-source domain.

When the moveboard(8) command ends normally, execute the showdcl(8) command to display and check the operation status of the move-source domain.

If the moveboard(8) command completes abnormally or leaves the board in an unwanted status, refer output messages to identify the problem, then correct it.

XSCF> showdcl -d 0

DID LSB XSB Status

00Running

00 00-0

01 00-1

Chapter 4 Practical Examples of DR 4-11