[Explanation] Confirming whether DR operation is going to be executed or not. Input "y" to execute it and "n" to stop it.

XSB#XX-Xwill be configured into DomainID X. Continue? [yn]:

[Explanation] Confirming whether DR operation is going to be executed or not. Input "y" to execute it and "n" to stop it.

XSB#XX-X could not be configured into DomainID X due to operating system error.

[Explanation] An error occurred in DR library of domain OS at configuration process. The error occurred at configuration management of domain OS.

[Remedy] Find out the cause of the DR failure referring monitoring message and console message. Try again after resolving cause.

A.2.4 setdcl

XSB is already assigned to an LSB in a running Domain (DomainID X).

[Explanation] The system board of the specified LSB has already been registered in DCL.

[Remedy] Power off the domain, or move XSB to the system board pool. Try again.LSB#00 is already registered in DCL.

[Explanation] The system board of the specified LSB has already been registered in DCL.

[Remedy] Confirm the domain, LSB and XSB. Setup data correctly.LSB#00 has not been registered in DCL yet.

[Explanation] The domain and LSB weren’t set up, when the DCL of no-mem, no- io and floating-board was changed.

[Remedy] Set up the domain and LSB. Try again.DomainID X does not exist.

[Explanation] No LSB was set up on the domain, when the DCL of configuration- policy was changed.

[Remedy] Set up the domain and LSB. Try again.

A-32SPARC Enterprise Mx000 Servers Dynamic Reconfiguration User’s Guide • September 2007