8.Check the status of the move-destination domain and moved system board.

Execute the showdcl(8) command to check the operation status of the move- destination domain, and then execute the showboards(8) command to check the status of the system board and confirm that addition of the system board has been reserved in the move-destination domain.

XSCF> showdcl -d 0

DID LSB

XSB

Status

00

 

Running

00

00-0

 

01

00-1

 

02

01-0

 

 

 

 

XSCF> showboards 01-0

 

XSB DID(LSB) Assignment Pwr Conn Conf Test

Fault

------------------------------------------------------------------

01-0 00(02)

Assigned

y

n

n

Passed

Normal

9.Add the system board to the move-destination domain.

Execute the addboard(8) command to add the system board to the move- destination domain. If the move-destination domain is in stopped status, the system board will be added the next time the domain is booted.

XSCF> addboard -c configure -d 0 01-0

10.Check the status of the move-destination domain and moved system board.

Execute the showdcl(8) command to check the operation status of the move- destination domain, and then execute the showboards(8) command to check the status of the moved system board.

XSCF> showdcl -d 0

DID LSB

XSB Status

00

Running

00

00-0

01

00-1

02

01-0

 

 

XSCF> showboards 01-0

 

XSB DID(LSB) Assignment Pwr Conn Conf Test

Fault

------------------------------------------------------------------

01-0 00(02)

Assigned

y

y

y

Passed

Normal

Chapter 4 Practical Examples of DR 4-25