[Remedy] Please contact customer service.

I/O callback failed in post-attach

[Explanation] I/O callback failed in post-attach [Remedy] Please contact customer service.

Kernel Migration fails. 0x%x

[Explanation] Internal error happened during kernel migration. [Remedy] Please contact customer service.

Failed to add CMP%d on board %d

[Explanation] CPU failed to power-on during DR attach. [Remedy] Please contact customer service.

FMEM error = 0x<error code>

[Explanation] DR detects error during the copy rename operation. [Remedy] Please contact customer service.

Cannot proceed; Board is configured or busy[Explanation] Board cannot be disconnected because its status is busy.

[Remedy] Repeat the action; If the problem still exists, please contact customer service.

drmach parameter is not a valid ID

[Explanation] ID parameter for status command is not a valid ID. [Remedy] Correct the format of the ID parameter.

drmach parameter is inappropriate for operation[Explanation] Parameter(s) for DR command specified incorrectly.[Remedy] Correct the parameter(s).drmach_node_ddi_get_parent: NULL dip[Explanation] Internal error during DR operation.

[Remedy] Please contact customer service.

drmach_node_ddi_get_parent: NULL parent dip

[Explanation] Internal error during DR operation.

A-20SPARC Enterprise Mx000 Servers Dynamic Reconfiguration User’s Guide • September 2007