■Example: Display of device information on
XSCF> showdevices |
|
| |||
CPU: |
|
|
|
|
|
|
|
|
|
| |
DID | XSB | id | state | speed | ecache |
00 | 0 | 2048 | 4 | ||
00 | 1 | 2048 | 4 | ||
Memory: |
|
|
|
|
|
|
| |
|
|
|
|
|
|
| ||
|
| board | perm | base |
| domain | target | deleted |
remaining |
|
|
|
|
|
|
| |
DID | XSB | mem MB mem MB address |
| mem MB | XSB | mem MB | ||
mem MB |
|
|
|
|
|
|
| |
00 | 8192 | 2048 | 0x000003c000000000 | 65536 |
|
| ||
I/O Devices: |
|
|
|
|
|
| ||
|
|
|
|
|
|
| ||
DID | XSB | device | resource | usage |
|
| ||
00 | sd0 |
| /dev/dsk/c0t0d0s0 | mounted filesystem | “/” | |||
00 | sd0 |
| /dev/dsk/c0t0d0s1 | swap area |
|
| ||
00 | sd0 |
| /dev/dsk/c0t0d0s1 | dump device (swap) |
| |||
00 | bge0 |
| SUNW_network/bge0 | bge0 hosts IP addresses: | ||||
10.1.1.1
3.1.5Displaying System Board Configuration Information
Use the showfru(8) command to display system board configuration information. The showfru(8) command displays information about the PSB division type and memory mirroring mode settings in list format.
To change the PSB configuration, use the setupfru(8) command.
The following examples show the format and options of the showfru(8) command.
showfru
showfru device location
showfru
Chapter 3 DR User Interface