XSB#XX-X is currently unavailable for DR. Try again later.

[Explanation] The specified system board (XSB#XX-X) has already been executed by another operation.

[Remedy] DR or power-off has been executing for another session. Try again after waiting for a while, with the confirmation of the XSB status.

XSB#XX-X has not been registered in DCL.[Explanation] System board (XSB#XX-X) is not registered to DCL.[Remedy] Register DCL information by setdc(8).Another DR operation is in progress. Try again later.

[Explanation] The specified system board (XSB#XX-X) has already been executed by another session.

[Remedy] DR operation is in progress by another session. Try again after waiting for a while, with the confirmation of the XSB status.

XSB#XX-X has been detected timeout by DR self test.

[Explanation] The timeout occurred during DR processing because the hardware diagnosis did not complete. There is something wrong with the hardware.

[Remedy] Find out the cause of the DR failure referring monitoring message and errorlog. Replace the failure component.

XSB#XX-X encountered a hardware error. See error log for details.

[Explanation] An error occurred during hardware diagnosis. There is something wrong with the hardware.

[Remedy] Find out the cause of the DR failure referring monitoring message and errorlog. Replace the failure component.

IP address of DSCP path is not specified.

[Explanation] DR cannot communicate with the domain because the DSCP IP Address is not set up or registered.

[Remedy] Register the DSCP IP Address.

An internal error has occurred. This may have been caused by a DR library error.

[Explanation] The DR processing cannot be failed on the domain OS. The error occurred at the DR library.

A-24SPARC Enterprise Mx000 Servers Dynamic Reconfiguration User’s Guide • September 2007