[Explanation] Confirming whether DR operation is going to be executed or not. Input "y" to execute it and "n" to stop it.

DR operation canceled by operator.

[Explanation] DR operation canceled by operator.

Domain (DomainID X) is not currently running.

[Explanation] Destination domain #X was not active when "-c configure" was specified.

[Remedy] Execute it by specifying "-c assign".

XSB#XX-X cannot be moved due to System Board Pool.

[Explanation] The XSB in the system board pool cannot be moved. [Remedy] Executing addboard command.

XSB#XX-X is not installed.

[Explanation] System board (XSB#XX-X) is not installed.

[Remedy] Specify the wrong XSB. Confirm the XSB by showboards(8).

XSB#XX-X is currently unavailable for DR. Try again later.

[Explanation] The specified system board (XSB#XX-X) has already been executed by another operation.

[Remedy] DR or power-off has been executing for another session. Try again after waiting for a while, with the confirmation of the XSB status.

XSB#XX-X has not been registered in DCL.

[Explanation] System board (XSB#XX-X) is not registered to DCL.

[Remedy] Register DCL information by setdc(8).

Another DR operation is in progress. Try again later.

[Explanation] The specified system board (XSB#XX-X) has already been executed by another session.

[Remedy] DR operation is in progress by another session. Try again after waiting for a while, with the confirmation of the XSB status.

XSB#XX-X is the last LSB for DomainID X, and this domain is still running. Operation failed.

[Explanation] XSB#XX-X is the last LSB for domain#X.

Appendix A Message Meaning and Handling A-29