3.2Command Reference

This section lists the DR commands and other commands related to DR.

For details of the commands, refer to SPARC Enterprise M4000/M5000/M8000/M9000 Servers XSCF Reference Manual. For the DR commands, see Section 3.1, “How To Use the DR User Interface” on page 3-1.

Note – (Note 1) Use of each command is restricted to selected administrators only. To use each command, you must have appropriate administrator privileges. For details, refer to SPARC Enterprise M4000/M5000/M8000/M9000 Servers XSCF Reference Manual.

Note – (Note 2) This section does not list all commands related to DR. For other DR-related commands, refer to SPARC Enterprise M4000/M5000/M8000/M9000 Servers XSCF Reference Manual.

TABLE 3-16DR Display Commands

Command name

Function

 

 

showdcl

Displays the DCL and the domain status.

showdomainstatus

Displays domain status.

showboards

Displays system board information.

showdevices

Displays information about the CPUs, memory, and I/O devices on

 

system boards.

showfru

Displays PSB configuration information.

 

 

TABLE 3-17DR Operation Commands

Command name

Function

 

 

setdcl

Updates and edits the DCL.

setupfru

Sets the division type and memory mirror mode for PSB.

addboard

Adds a system board into a domain.

deleteboard

Deletes a system board from a domain.

moveboard

Moves a system board between domains.

 

 

Chapter 3 DR User Interface 3-25