■Example 2: Display of detailed information on all system boards

XSCF> showboards

-v -a

 

 

XSB R DID(LSB)

Assignment Pwr Conn Conf Test

Fault

COD

--------------------------------------------------------------------------

00-0

00(00)

Assigned

y

y

y

Passed

Normal

n

00-1

00(01)

Assigned

y

n

n

Passed

Degraded

n

00-2

* SP

Available

y

n

n

Unknown

Normal

n

00-3

01(15)

Assigned

y

y

y

Passed

Normal

n

■ Example 3: Display of information on the system board in the system board pool in domain #0

XSCF> showboards -c sp -d 0

 

XSB DID(LSB) Assignment Pwr Conn Conf Test

Fault

------------------------------------------------------------------

00-2 SP

Available

y

n

n

Passed

Normal

3.1.4 Displaying Device Information

Use the showdevices(8) command to display device information.

The showdevices(8) command displays information about the physical devices including CPUs, memory, and PCI cards mounted on system boards, and displays the hardware resources usable with these devices in hardware resource format. The showdevices(8) command is used before a DR operation to confirm information about and status of the hardware resources of the DR-target system board, and to determine the process to access the CPU and I/O devices.

Resource management applications or subsystems provide information concerning use of the hardware resources. A showdevices(8) command offline query about management target resources estimates the effect of each DR operation applied to the system boards and displays the results.

The following examples show the format and options of the showdevices(8) command.

showdevices [-v] [-p bydevicebyboardqueryforce] xsb […] showdevices [-v] [-p bydevicebyboard] -d domain_id showdevices -h

3-10SPARC Enterprise Mx000 Servers Dynamic Reconfiguration User’s Guide • September 2007