8.Check the status of the domain.

Execute the showdcl(8) command to display domain information, and then check the operation status of the domain. Based on the operation status of the domain, determine whether to perform the DR operation or reboot the domains.

XSCF> showdcl -d 0

DID LSB XSB Status

00Running

0000-0

0101-0

9.Add the new system board to the domain.

Execute the addboard(8) command to add the system board to the move- destination domain.

XSCF> addboard -c configure -d 0 01-0

10.Check the status of the domain and added system board.

When the addboard(8) command ends normally, execute the showdcl(8) command to check the operation status of the domain, and then execute the showboards(8) command to check the status of the added system board.

If the addboard(8) command completes abnormally or leaves the board in an unwanted status, refer to output messages to identify the problem, then correct it.

XSCF> showdcl -d 0

 

DID

LSB

XSB

Status

 

00

 

 

Running

 

 

00

00-0

 

 

 

01

01-0

 

 

 

 

 

 

XSCF> showboards 01-0

 

XSB

DID(LSB)

Assignment Pwr Conn Conf Test

Fault

-----------------------------------------------------------------

01-0 00(01)

Assigned

y

y

y

Passed Normal

Chapter 4 Practical Examples of DR 4-15