Invalid parameter.

[Explanation] There is an error in the specified argument or operand.

[Remedy] Confirm the specified argument or operand and execute the command once again.

Permission denied.

[Explanation] Do not have privilege.

[Remedy] Confirm the user privilege and the command privilege. In the case of high-end servers, please also confirm whether command is executed by XSCF on standby side.

A hardware error occurred. Please check the error log for details.

[Explanation] Hardware error occurred. Please confirm monitoring message and the error log.

[Remedy] Find out the cause of the DR failure referring monitoring message and error log. Replace the failure component.

An internal error has occurred. Please contact your system administrator.

[Explanation] DR failed. There is a possibility that DR failed because of an internal error in XSCF.

[Remedy] Find out the cause of the DR failure referring monitoring message and error log. Please also confirm the XCP version.

A.2.3 moveboard

XSB#XX-X will be moved from DomainID X to DomainID X immediately. Continue? [yn]:

[Explanation] Confirming whether DR operation is going to be executed or not. Input "y" to execute it and "n" to stop it.

XSB#XX-X will be assigned to DomainID X immediately. Continue? [yn]:

[Explanation] Confirming whether DR operation is going to be executed or not. Input "y" to execute it and "n" to stop it.

XSB#XX-X will be assigned to DomainID X after DomainID X restarts. Continue? [yn]:

A-28SPARC Enterprise Mx000 Servers Dynamic Reconfiguration User’s Guide • September 2007