3.Check the status of the move-destination domain.

Execute the showdcl(8) command to display domain information, and then check the operation status of the move-destination domain. Based on the operation status of the move-source and move-destination domains, determine whether to perform the DR operation or change the domain configuration.

XSCF> showdcl -d 0

DID LSB XSB Status

00Running

00 00-0

01 00-1

02 01-0

4.Check the status of the system board to be moved.

Execute the showboards(8) command to display system board information, and then check the status of the system board to be moved.

XSCF> showboards 01-0

 

XSB DID(LSB) Assignment Pwr Conn Conf Test

Fault

------------------------------------------------------------------

01-0 01(00)

Assigned

y

y

y

Passed

Normal

5.Reserve the move of the system board.

Execute the moveboard(8) command to reserve deletion of the system board from the move-source domain and addition of the system board to the move- destination domain.

XSCF> moveboard -c reserve -d 0 01-0

6.Check the reserved status of the system board.

Execute the showboards(8) command with the -voption specified to display system board information, and confirm that moving the system board to the move-destination domain has been reserved.

XSCF> showboards -v 01-0

 

XSB R DID(LSB) Assignment Pwr Conn Conf Test

Fault COD

--------------------------------------------------------------------------

01-0 * 01(00)

Assigned

y

y

y

Passed Normal n

7.Stop the move-source domain.

Stop the move-source domain. This operation executes the reserved deletion of the system board from the move-source domain as a change in domain configuration, and the reservation of the addition of the system board to the move-destination domain.

4-24SPARC Enterprise Mx000 Servers Dynamic Reconfiguration User’s Guide • September 2007