Control panel board

LAN1 LED

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

LAN2 LED

System fault LED

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Blower fault LED

Power LED

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Fan fault LED

Fault LED reset button

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

USB port

Power button

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

USB connector

Front panel connector

System fault LED glows amber when a hardware or system failure occurs. Pressing the fault LED reset button turns this LED off, but does not correct the fault.

Power LED glows green when the server has power and flashes green when the server is in power saving mode. This LED glows amber when AC power to the server is on, but the internal (DC) power is off which means there is power to the server but the server is powered down.

Fault LED reset button resets any of the fault LEDs to its original state. This button does not correct or clear the fault. If the fault condition persists, the appropriate LED will turn on again until the fault is corrected.

Power button turns the server on and off.

LAN1 LED blinks green when there is traffic on the LAN1 connector. Glows amber when the LAN1 connector experiences an interruption in connectivity.

LAN2 LED blinks green when there is traffic on the LAN2 connector. Glows amber when the LAN2 connector experiences an interruption in connectivity.

Blower fault LED glows amber when one of the blowers has failed or entered an out-of-tolerance state.

Fan fault LED glows amber when one of the fans has failed or entered an out-of-tolerance state.

USB port provides front panel access for USB peripherals.

System Features

9